Steps to move a upright piano

Pianos regularly make movers annual list of items that are most often damaged. Grand pianos are specifically troublesome. Practicing the following treatments for taking apart, padding and loading grand pianos will avoid damage, lower claims expense, and enhance customer complete satisfaction.

1) At least three individuals are needed to manage a baby grand piano. If the infant grand piano needs to go up or down stairs or if a complete or show grand piano requires to be transported, a minimum of 4 individuals are needed.

2) Always finish a precise and thorough inventory. It might be preferable or required to utilize a visual stock to adequately describe and show pre-existing damage.

3) As numerous parts are dismantled, please place all hardware in a correctly labeled parts bag and then put the parts bag in a "Components Box".

4) Get rid of the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furnishings pad.

5) Detach the cover by getting rid of the hinge pins. Have a single person wiggle the cover, holding it opposite the hinge, while a 2nd individual works the pin loose. Please be mindful not to harm the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a small fabric to assist avoid damage to the wood if essential. Wrap the lid in a clean furniture pad.

6) Get rid of the prop that holds the lid open and wrap it in a clean furnishings pad. The prop has a hinge pin and remains in two pieces.

7) Remove the pedal assembly and cover it in a tidy furniture pad. The braces at the back of the assembly rest in slots at each end. When eliminating the screws, please take care not to drop the braces. In addition, please be specifically careful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by placing a piece of masking tape with the proper number on each rod. Note: If masking tape is not available, please use properly labeled parts bags for this function. When reassembling at destination, please make certain to put the rods in the correct order so that the pedals will work effectively.

8) Pad the piano by placing a clean rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to avoid it from flopping open why not find out more while you handle the piano. Cover the top of the piano with two tidy furnishings pads, nicely folded around the keyboard. Usage elastic band to secure the pads. Note: Please guarantee that the surface of the piano is dust-free before padding it. Padding a highly sleek surface area that is dirty might trigger great scratches, specifically on a black lacquer surface.

9) Position a piano board and attach the straps so that it is all set to get the piano. The raised brace on the piano board need to be at the keyboard end of the piano.

10) Remove the left front leg by positioning one individual underneath the piano at the left end of the keyboard. Be sure to have 2 people raising the corner of the piano while the 3rd individual eliminates the leg. Keep in mind: Please be sure to note which legs were gotten rid of from which positions because some pianos have legs that are not interchangeable.

11) Location the piano on the piano board by lowering the "leg-less" end onto the board. Please make sure to raise the entire piano a little while finishing this maneuver to avoid excessive pressure on the remaining, attached legs as the piano ideas. Raise the piano to an upright position on the board. Note: Please make sure that the soundboard is secure before lifting. Make sure that the piano is centered snugly versus the brace at the end of the piano board. Keep in mind: Never ever leave the piano unattended. Always have at least someone holding the piano constant at all times.

12) Remove the 2 staying legs and wrap them in tidy furnishings pads. These legs are kept in place by a "key and slot" plan. To get rid of the leg, slide it inward towards the center of the piano up until it comes out of the slot.

13) Protect the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furnishings pads but under the straps to supply additional protection to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.

14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, use the piano board as a skid. After adequately padding the stairs for protection versus residence damage, position the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the top end of the piano board to prevent the piano from slipping.

16) To load the piano, leave it on the piano board and place it in a tier as the very first base item with the keyboard dealing with the wall of the preceding tier. The very best location to fill the cushioned lid is between the piano and the preceding tier or in between the piano and the wall.

Although grand pianos represent a significant difficulty, they can be moved without damage by utilizing sound judgment and practicing the treatments noted above.

Leave a Reply

Your email address will not be published. Required fields are marked *